Product Overview
Modern business networks are used for increasingly diverse
applications – traditional data streams, VoIP voice traffic, video
output from digital security cameras and remote control devices to
name a few. The range of devices attached to today’s converged
network often need to be supported not just in terms of data –
equipment such as VoIP IP telephones and Wireless Access Points
frequently need to be powered in physical locations where mains
power is not available or difficult to deliver. Providing power to
such devices via an Ethernet UTP cable is an elegant and easy to
implement solution.
The 16 Port 10/100/1000Mbps PoE+ Switch offers advance switching
controls and provides power to network devices using Ethernet
cables. This scalable and cost effective solution allows a managed
network to efficiently expand to previously unattainable levels.
High Performance Wire-Speed Switching
16-port all Gigabit 16-port non-managed POE switch specially
designed for security with POE function. It has the function of
automatically detecting and identifying PD devices that meet the
IEEE802.3af/at standard and powering them, so there is no need to
go Worried about damaging private standard POE or non-POE
equipment. PSE3216S is an economical choice for small business
networks that use POE to deploy wireless access points (AP) and
IP-based network surveillance cameras.
The PSE3216S POE switch can effectively solve the problems of
anti-lock maintenance, wireless coverage, terminal equipment power
acquisition, security monitoring engineering, and long engineering
time, saving engineering costs to the greatest extent.
Key Features
1. Factory direct sales, quality assurance
2. Full interface POE power supply function port output power 30W
3. 16 Gigabit RJ45 ports + 2 Gigabit uplink ports + 2 Gigabit SFP
port non-combo
4. Anti-static super stability and safety Non-burning equipment
5. 1-year warranty
6. 250W total power supply
7. Backplane bandwidth 52Gbps (non-blocking)
Port rate: 10/100/1000Mbps
POE protocol: IEEE802.3af/at
Number of POE ports: 16
Power supply power: 250W
POE pin position: 1,2+/3,6-
Maximum output power of single port: 30W
AC: 100~240VAC/50-60Hz
Technical Specification
Hardware Specification |
Copper Ports |
16 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X ports with IEEE
802.3af/at PoE |
Uplink Ports
| 2 Gigabit uplink ports |
SFP/mini-GBIC Slots |
2 1000Base-SX/LX/BX SFP interfaces |
Switch Architecture |
Store-and-Forward |
Switch Fabric |
52Gbps / non-blocking |
Switch Throughput |
38.688Mpps@64 bytes
|
Address Table |
8K entries |
Share Data Buffer |
4Mbytes |
Flow Control |
Back pressure for Half-Duplex IEEE 802.3x Pause Frame for Full-Duplex |
LED | System: Power ( yellow) 10/100 LINK / ACT(Green), 1000 LINK ( yellow) |
Dimension (W x D x H) |
295mm*165mm*44mm, 1U height |
Weight |
2.5 kg |
Power Requirement |
100~240V AC, 50-60 Hz |
Power Consumption / Dissipation |
250 Watts maximum |
Power over Ethernet |
PoE Standard |
IEEE 802.3af/at Power over Ethernet / PSE |
PoE Power Supply Type |
End-Span |
PoE Power Output | Per Port 52V DC, af:350mA . Max. 15.4 Watts at:600mA.Max.30W |
Power Pin Assignment |
1/2(+), 3/6(-) |
PoE Power Budget |
250Watts |
PoE Ability | Number of PD @13W watts:16 Number of PD @20 watts:12
|
Standards Conformance |
Standards Compliance |
IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX/100Base-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000Base-T IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet |
Environemmental |
Operating | Working temperature: 0°-40°C Working humidity: 10%-90% non-condensing,
|
Storage | Storage temperature: -40°-70° storage humidity: 5%-90% non-condensing |
